Full Kit including 1 month super bouquet subscription –Ksh 3,999
Decoder only Ksh 1,999 inclusive of super bouquet
Accessories; Dish, LNB and 20m cable Ksh 2,500
Full Kit including 1 month super bouquet subscription –Ksh 3,999
Decoder only Ksh 1,999 inclusive of super bouquet
Accessories; Dish, LNB and 20m cable Ksh 2,500
PRICE
Full Kit including 1 month super bouquet subscription –Ksh 3,999
Decoder only Ksh 1,999 inclusive of super bouquet
Accessories; Dish, LNB and 20m cable Ksh 2,500
SPECIFICATION
HS210-HA is integrated with single powerful Hi3716MV300 chipset. This device adopts advanced demodulate and decode technology and is fully compatible with DVB-S2/DVB-S/H.264/MPEG2 standards. It supports both PAL and NTSC and provides you with panel control and remote control. The friendly-oriented designed menu and online operation tips will bring you into a whole new digital TV world where you will enjoy plenty of our services.
1. Features
☆ Powerful chip Hi3716MV300 provided by Hisilicon.
☆ Fully DVB-S2/DVB-S / MPEG-2 / H.264 compliant.
☆ Support of SD and HD resolution for HD STBs
☆ H.264 High Definition Digital picture quality
☆ Embedded with Conax CAS7 CA system and supports advance security based chipset pairing.
☆ PIN control, locking and viewing level restriction features for parental locking.
☆ Support Electronic Program Guide.
☆ Support widescreen capable.
☆ Reliable software auto update system, dual loader technology can supports application and loader software upgradeable Over The Air or USB.
☆ Provide up-to-date on-screen and personalized messages.
☆ Support multi- language Menu.
☆ Support EN300743 standard for Subtitle.
☆ The STB perform the complete retuning procedure on the basis of the predefined linkage descriptor included in the Net work Information Table (NIT) without subscriber intervention.
☆ Learning function of remote control
2. Hardware & Interface Specification
2.1. TUNER
☆ Input frequency: 950MHz to 2150MHz
☆ Input signal level: -20~-65dBm
☆ Input impedance: 75Ω
☆ RF IN : IEC 60169-2 female connectors
2.2. CHANNEL DECODING
☆ Standard: DVB-S EN300 421 and DVB-S2 EN302 307
☆ Demodulation: QPSK(DVB-S and DVB-S2), 8PSK(DVB-S2),
☆ FEC:
DVB-S: QPSK
FEC rates supported are: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2: QPSK:
FEC rates supported are: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
DVB-S2: 8PSK:
FEC rates supported are: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
2.3. DEMULTIPLEXER
☆ Standard: MPEG-2 ISO/IEC 13818-1
2.4. VIDEO DECODING
☆ Standard: MPEG-2, MP@ML
H.264/MPEG-4 AVC, MP@L3
H.264/MPEG-4 AVC, HP@L4
☆ Aspect ratio: 4:3, 16:9
☆ Video format: PAL/NTSC Auto-convert
☆ Video resolution: 1920x1080
2.5. AUDIO DECODING
☆ Standard: ISO/IEC 13818-3
ISO/IEC14496-3:2005
☆ Decoding: MPEG / MusiCam Layer I & II
High Efficiency AAC(HE-AACv2)
Low Complexity AAC(LC-AAC)
☆ Audio mode: Mono, Dual Channel, Stereo, Joint Stereo
☆ Sampling frequency: 32, 44.1, 48KHz
2.6. PROCESSOR AND MEMORY
☆ CPU: 3716MV300
☆ Processor speed: 650MHz
☆ Flash memory: 4MB NOR+128MB NAND
☆ RAM: 256MBytes
2.7. SMART CARD
☆ Standard: ISO 7816
2.8. FRONT PANEL
☆ LED display: 4-digit LED to indicate channel number and status
☆ Indicators: POWER, LOCK
☆ Keys: MENU/OK/CH-/CH+/VOL-/VOL+
☆ Smart card slot(s): 1
☆ IR receiver: 38KHz
2.9. REAR PANEL
☆ RF IN : IEC 60169-2 female connectors
☆ USB: USB 2.0,type-A
☆ RCA output: 3 female RCA (1 Left Audio,1 Right Audio,1 Video)
☆ Y/Pb/Pr: Component video(3 x RCA socket)
☆ HDMI: HDMI Version 1.3 or later
☆ S/PDIF: Digital audio
☆ Power IN: ‘12V= 1.5A’MAX
2.10. IR Remote Control
☆ Category: IR Carrier 38KHz
☆ Battery: 2x1.5V AA
2.11. POWER
☆ Input voltage: AC100~240V, 50/60Hz
☆ Power consumption: 8W max
☆ Separate internal fuse and overvoltage protection
☆ Double insulation construction
☆ Short-circuit and overheating protection
☆ Support standby functionality
2.12. AMBIENT
☆ Operation temperature: 0 ~ +45℃
☆ Storage temperature: -15 ~ +45℃
3. Software Specification
3.1. Language Settings
☆ Menu Language setting: For users to select the menu language ,support English and French language.
3.2. EPG
☆ EPG scan: search the EPG information of the selected channel
☆ Give the Schedule of the next 7 days.
☆ Give the detail information of the selected program.
☆ Give the Present / Following information of the selected channel
3.3. Channel list
☆ Give the information of the current channels stored in the EEPROM
☆ Support automatic classification by BAT
3.4. Channel Edit
☆ Sorting the channels
☆ Lock the selected channels
☆ Set the favorite channel for the user
☆ Delete the selected channel
3.5. System Setting
☆ Satellite & Transponder Scan setting:
Manual search mode
Automatic search mode
☆ Aspect Ratio: for user to determine the Aspect Ratio(4:3 or 16:9)
☆ Screen Transparency Setting: for user to determine the value of the OSD Transparency
☆ Banner Duration: for user to select the display time
☆ Parental control: provide the following two types of software lock
Channel Lock
Install Lock
☆ Software update: Automatic software upgrades via USB or OTA
OTA set
Update start
☆ Default setting: For user to reset the STB to factory setting
☆ STB Information: include the following items
Hardware information
Software information
Serials number of STB
3.6. CAS
☆ Subscription Status
☆ Event Status
☆ Tokens Status
☆ Change CA PIN
☆ Maturity Rating
☆ CA System Info
☆ Mail List
3.7. OTA Loader
☆ The STB embedded dual loader for security software updating.
☆ The loader module can be upgraded by itself.
3.8. Other functions
☆ The channel list can display according to the different sort, such as the TV; Radio; Favorite etc.
☆ To display the currently broadcasting channel’s information when switch channel, such as the channel name, the P/F information ,signal quality level etc.
4. Appearance
![]()
![]()
5. Remote Control
![]()
![]()
Telephone:
0719077077,7:00-24:00
Email: info.ke@startimes.com.cn